English
Español
简体中文
4-dimensional laser line output at the same time
Generates 6 crossed lines
Machine can be operated in a lean state with the alarm function turned off.
Three-dimensional laser lines can work separately
Working against a wall within a range of 9 mm
12-Line LD Wall High-Precision Laser Level, a state-of-the-art tool that sets a new standard for accuracy and efficiency in leveling and alignment tasks. With a 4-dimensional laser line output simultaneously, this laser level creates 6 crossed lines, providing unparalleled precision for your projects.
12-Line LD Wall Laser Level
-
Product Details
12-Line LD Wall Laser Level is a powerful wall laser level, widely used in construction, decoration and other fields. Its use is simple and easy to understand. The following are detailed steps.
Make sure that the laser level has been properly installed with batteries or powered on, and is on a stable working platform. Press the switch button and the instrument will start and enter the automatic correction mode. At this time, the sensor inside the laser level will detect and adjust the horizontal and vertical degrees of the laser line to ensure the accuracy of the measurement. According to the measurement requirements, select the appropriate laser line working mode. 12-Line LD Wall Laser Level usually has a variety of line combination modes, such as single horizontal line, single vertical line, cross line, and multiple cross lines. The required working mode can be easily switched through the mode selection button on the instrument or the remote control.
Place the laser level in a suitable position on the wall to be measured to ensure that the laser line can be projected on the wall completely and clearly. Wait for a few seconds until the laser line is stable, and then you can read or mark it. During the measurement process, you should pay attention to keep the instrument stable and avoid shaking or collision to avoid affecting the measurement accuracy.
-
Specification
Emitting Iaser 2VIH Laser waveIength 515nm Laser power 40mw VerticaI Iine accuracy ±1mm/5m HorizontaI Iine accuracy ±1mm/5m Line width 5m/2mm Automatic anping correction ±3 HorizontaI angIe of incidence 360° VerticaI Iine angIe of incidence 360° Laser model -20℃-60℃ Type of alarm ≥3 ° Laser lines flickering
About Us
Nantong HDL Electric Tools Co., Ltd.
Nantong HDL Power Tools Co., Ltd. was established in 2004. It is a China 12-Line LD Wall Laser Level Manufacturers and Wholesale 12-Line LD Wall Laser Level Suppliers. As a member of Qidong Power Tools Industry Association. Nantong HDL Power Tools Co., Ltd.covers an area of 6,600 square meters, with a factory space of 4,200 square meters.
It possesses industrially standardized facilities and state-of-the-art production and testing equipment. Moreover, it boasts a team of middle and senior-level managers as well as technical experts. The company specializes in the research, development, and manufacturing of integrated optoelectronic laser measurement technology and is committed to leading advancements in laser measurement and intelligent technologies. It provides professional solutions for construction, digitalized buildings, and industrial intelligent equipment.
Certificate Of Honor
News
-
The 16-Line Green Line Wall-Ground Integrated Laser Level is a high-precision, full-featured measuri...
READ MORE -
In many fields such as construction, interior decoration and equipment installation, 2-Line Red Lase...
READ MORE -
In the field of construction and interior decoration, the accuracy and stability of measuring tools ...
READ MORE -
In modern construction and interior decoration, 4-Line Red Line Wall Laser Level is an indispensable...
READ MORE -
In modern construction, decoration and measurement industries, the accuracy and efficiency of tools ...
READ MORE
Message Feedback
Related products
-
Bare unit X1Batteries 5 dry batteries X 2 Battery box X 1Instruction manual X1Certificate of Conformity X1Cloth bag X1Kraft paper box X 1
See Details -
Bare unit X1Batteries 5 dry batteries X 2 Battery box X 1Instruction manual X1Certificate of Conformity X1Cloth bag X1Kraft paper box X 1
See Details -
Barebone X 1Battery 21700-9000mAh X 1 Battery 18650-2400mAh X 1Manual X1Manual bag X1Certificate of Conformity X12.4G Remote Control X 1Charger (2A) X 1Charger Cable X 1Wall bracket X 1Iron plate X 1A...
See Details -
Barebone X 1Battery 21700-9000mAh X 1 Battery 18650-2400mAh X 1Manual X1Manual bag X1Certificate of Conformity X12.4G Remote Control X 1Charger (2A) X 1Charger Cable X 1Wall bracket X 1Iron plate X 1A...
See Details -
Barebone X 1Battery 21700-9000mAh X 1 Battery 18650-2400mAh X 1Manual X1Manual bag X1Certificate of Conformity X12.4G Remote Control X 1Charger (2A) X 1Charger Cable X 1Wall bracket X 1Iron plate X 1A...
See Details -
4-dimensional laser line output at the same timeGenerates 10 crossed linesMachine can be operated in a lean state with the alarm function turned off.Three-dimensional laser lines can work separatelyWo...
See Details -
4-dimensional laser line output at the same timeGenerates 6 crossed linesMachine can be operated in a lean state with the alarm function turned off.Three-dimensional laser lines can work separatelyWor...
See Details -
4-dimensional laser line output at the same timeGenerates 6 crossed linesMachine can be operated in a lean state with the alarm function turned off.Three-dimensional laser lines can work separatelyWor...
See Details -
4-dimensional laser line output at the same timeGenerates 10 crossed linesMachine can be operated in a lean state with the alarm function turned off.Three-dimensional laser lines can work separatelyWo...
See Details -
4-dimensional laser line output at the same timeGenerates 10 crossed linesMachine can be operated in a lean state with the alarm function turned off.Three-dimensional laser lines can work separatelyWo...
See Details -
4-dimensional laser line output at the same timeGenerates 6 crossed linesMachine can be operated in a lean state with the alarm function turned off.Three-dimensional laser lines can work separatelyWor...
See Details -
The 12-Line Red Line Wall Laser Level has the output function of 12 red laser lines, which makes it particularly good at handling complex measurement tasks. The brightness and clarity of the red laser...
See Details
Industry knowledge
Introduce the 12-Line LD Wall Laser Level
The 12-Line LD Wall High-Precision Laser Level stands at the forefront of cutting-edge technology, offering a remarkable solution for professionals and enthusiasts engaged in leveling and alignment tasks. The standout feature of this laser level lies in its ability to output 4-dimensional laser lines simultaneously, creating a web of 6 crossed lines that redefine precision in your projects. This advanced laser level is equipped to handle a myriad of applications with unrivaled accuracy.
One of the standout functionalities of the 12-Line LD Wall Laser Level is its capacity to operate in a lean state with the alarm function turned off. This allows users to adapt the machine to their specific needs, enhancing flexibility and efficiency during various tasks. The laser level also offers three-dimensional laser lines that can work independently, providing versatility for intricate projects that demand specific line configurations.
Precision is paramount with this laser level, and its ability to work against a wall within a range of 9 mm ensures that even the tightest spaces can be accurately measured and aligned. The automatic anping correction feature, with an impressive tolerance of ±3, guarantees consistently accurate results. The horizontal angle of incidence spans a full 360 degrees, as does the vertical line angle of incidence, granting users complete control and coverage in any direction.
Furthermore, the 12-Line LD Wall Laser Level is designed to operate seamlessly in a range of temperatures, from -20℃ to 60℃, ensuring reliability and performance in diverse environmental conditions. To enhance user awareness and safety, the laser level incorporates a sophisticated alarm system that triggers when the laser lines deviate by more than 3 degrees, providing a clear indication through line flickering. This meticulous attention to detail and comprehensive set of features make the 12-Line LD Wall High-Precision Laser Level an indispensable tool for professionals seeking top-tier performance in their leveling and alignment endeavors.
Are there any other accessories required to install 12-Line LD Wall Laser Level correctly?
The installation of a 12-Line LD Wall Laser Level typically requires a few accessories to ensure proper setup and accuracy.
Tripod:
A stable and adjustable tripod is essential for mounting the laser level at the desired height and maintaining stability during operation. Ensure that the tripod is suitable for the weight and size of the laser level.
Mounting Bracket:
Some 12-Line LD Wall Laser Levels come with mounting brackets that allow for easy attachment to walls or other surfaces. If not included, you may need to purchase a compatible mounting bracket separately.
Receiver (Optional):
In outdoor or large-scale construction settings, a laser receiver may be necessary to detect the laser beam over longer distances or in bright lighting conditions.
Remote Control (Optional):
Some laser levels come with remote controls, allowing you to operate the level remotely, change settings, or turn the laser on and off without having to touch the unit.
Target Plates or Glasses:
These accessories can enhance visibility and help you locate the laser lines accurately. Target plates are reflective surfaces that reflect the laser beam, while laser glasses may enhance visibility in certain lighting conditions.
Carrying Case:
A durable carrying case can protect the laser level during transportation and storage. It also helps keep all accessories organized.
Batteries or Power Source:
Ensure that you have the required batteries for the laser level or, if applicable, a power source to keep the unit operational.
User Manual:
While not an accessory, having the user manual on hand is crucial for understanding the specific features and proper usage of the laser level.
Leveling Base (for Self-Leveling Models):
If your laser level is self-leveling, it may require a leveling base to ensure that it is set up on a stable and level surface before operation.
Professional laser level manufacturer
Copyright © 2023 Nantong HDL Electric Tools Co., Ltd. All Rights Reserved.
-
Phone: +86-13962813701
Tel: +86-0513-83278888
Fax: +86-0513-83271444
E-mail: [email protected]
ADD: Toubu village, Zhaomin town, qidong city, jiangsu, China.